ENGEN111-23B (HAM)

Electricity for Engineers

15 Points

Edit Header Content
The University of Waikato
Academic Divisions
Division of Health Engineering Computing & Science
School of Engineering

Staff

Edit Staff Content

Convenor(s)

Lecturer(s)

Administrator(s)

: natalie.shaw@waikato.ac.nz
: janine.williams@waikato.ac.nz

Placement/WIL Coordinator(s)

Tutor(s)

Student Representative(s)

Lab Technician(s)

Librarian(s)

: anne.ferrier-watson@waikato.ac.nz

You can contact staff by:

  • Calling +64 7 838 4466 select option 1, then enter the extension.
  • Extensions starting with 4, 5, 9 or 3 can also be direct dialled:
    • For extensions starting with 4: dial +64 7 838 extension.
    • For extensions starting with 5: dial +64 7 858 extension.
    • For extensions starting with 9: dial +64 7 837 extension.
    • For extensions starting with 3: dial +64 7 2620 + the last 3 digits of the extension e.g. 3123 = +64 7 262 0123.
Edit Staff Content

What this paper is about

Edit What this paper is about Content

Good understanding of electrical system operation is of fundamental importance to be an effective engineer in the 21st century. This paper provides the basic to further study into electrification, automation and robotics, artificial intelligence, along with renewable energy and the internet, things that are shapping the world of tomorrow. This course covers fundamentals of electrical circuits based on linear components, with a brief introduction to non-linear components and delivery of electrical power. It assumes a basic familiarity with voltage, current, energy, power, conductors and insulators.

The learning outcomes for this paper are linked to Washington Accord graduate attributes WA1-WA11. Explanation of the graduate attributes can be found at: https://www.ieagreements.org/
Edit What this paper is about Content

How this paper will be taught

Edit How this paper will be taught Content

The course will emphasize self-directed learning. Students will be expected to monitor their own progress through feedback and take appropriate, corrective actions. Students are also expected to manage their time and plan their workload carefully such that they do not miss any assessment component. The recorded lectures are available online through Moodle and is the first stop for learning new topic each week. Lectures and worksheet discussion classes will be running throughout the trimester to provide additional interactions and customized supports.

Students attend two lectures, one worksheet discussion class and one laboratory each week.

  • Lectures and Labs will start on week 1 . Complete the online quiz by the same day you have lecture.
  • Tutorials commence in the week 2
  • Tests are conducted online through Moodle
  • There will be an examination at the end of the trimester.

Lectures
The self-pace study occurs one week before the scheduled topic will be discussed in the class. For example, we will cover Ohm's Law in week 2. That means we expect, during week 1, every student to watch all the videos listed under week 2 section of the Moodle and go through the relevant section of the textbook. Attempt the week 2 online quiz during week 1, you can expect your questions answered in the lecture session in week 2.

Tutorials
One-hour tutorial every week will go through worked examples to prepare the class for examination.

Labs
All lab related works should be completed within the allocated three-hour session. Consult Moodle page for detail information regarding labs.

Online Quizzes
Online quizzes are available online through Moodle and are assessed. Have as many attempts as you like. You are advised to attempt the online quizzes as soon as you complete the recorded lecture (and textbook) to find out any gap in understanding. That way you can make the best use of the coming lecture/tutorial slots to fill-up the gap in your understanding.

Tests
There will be one-hour test running on Moodle every fortnight. These tests are a major assessed component in this paper. The tests have one hour time limit. You are responsible to find a suitable computer to complete the test. Missing the test time will result in zero mark for the test component.

Please do not assume all assessment due date follow the same pattern. Check individual assessment opening and closing time on Moodle. This is part of the training as engineer to cope with varying week-to-week tasks.

Edit How this paper will be taught Content

Required Readings

Edit Required Readings Content

Some recorded lectures are mandatory. You will be allowed to attempt quizzes & tests only after completing the specified recorded lectures.

This restriction will be enforced to help your to maintain consistent pace of learning and to ensure everyone's safety in the laboratory.

Edit Required Readings Content

Learning Outcomes

Edit Learning Outcomes Content

Students who successfully complete the course should be able to:

  • Design, analyse and build linear electrical circuits (with appropriate use of voltage sources, current sources, and electrical ground); apply Thevenin’s equivalent circuit in the analysis and design of an electrical circuits. (WA1; WK1, WK3)
    Linked to the following assessments:
  • Apply superposition and Kirchhoff's laws to solve circuit problems; analyse charging/discharging characteristics of R-C and R-L circuits; perform steady-state analysis of single-phase AC circuits; calculate electrical power and energy (WA1; WK1, WK3)
    Linked to the following assessments:
  • Recall the key properties and uses of transformers and diodes in the electrical circuits (WA1; WK1, WK3)
    Linked to the following assessments:
  • Use appropriate measurement instruments to diagnose electrical circuits (WA1; WK1, WK3)
    Linked to the following assessments:
  • Practice good time management and independence appropriate to a professional engineer (independent learning, timely completion of allocated tasks, maintain a professional quality laboratory notebook) (WA11)
    Linked to the following assessments:
Edit Learning Outcomes Content
Edit Learning Outcomes Content

Assessments

Edit Assessments Content

How you will be assessed

Edit How you will be assessed Content

Due dates for individual Tests and Quizzes can be found on the Moodle page.

Samples of your work may be required as part of the Engineering New Zealand accreditation process for BE(Hons) degrees. Any samples taken will have the student name and ID redacted. If you do not want samples of your work collected then please email the engineering administrator, Natalie Shaw (natalie.shaw@waikato.ac.nz), to opt out.

Edit How you will be assessed Content

The internal assessment/exam ratio (as stated in the University Calendar) is 50:50. There is no final exam. The final exam makes up 50% of the overall mark.

The internal assessment/exam ratio (as stated in the University Calendar) is 50:50 or 0:0, whichever is more favourable for the student. The final exam makes up either 50% or 0% of the overall mark.

Component DescriptionDue Date TimePercentage of overall markSubmission MethodCompulsory
1. Examination
50
2. Tests
Sum of All
25
  • Online: Submit through Moodle
3. Laboratory
Sum of All
12
  • Hand-in: In Lab
4. Quizzes
Sum of All
11
  • Online: Submit through Moodle
5. Guided Design
24 Sep 2023
No set time
2
  • Hand-in: In Lab
Assessment Total:     100    
Failing to complete a compulsory assessment component of a paper will result in an IC grade
Edit Assessments Content